Advanced Search
Search Results
267 total results found
Benson Wiki Topics
Look here for any and all information on Benson equipment, policy and procedures.
FOH Audio
All things relating to the FOH audio position, and the DiGiCo Q338 console. How to get the console up and running, how to patch audio sources, and how to troubleshoot common issues.
Broadcast Audio
Everything relating to the broadcast audio position, and all audio routing relating to booth and stream audio.
Audio Recording
How to set up recording for recitals, chapels, and any other event that gets recorded.
Lighting
Understanding the lighting console and instruments in use in Benson.
Dante
How to configure and diagnose Dante audio patching
Video Switching
How to manage video switching via the panel, and through the app.
Cameras
How to operate and configure the cameras in Benson
Video Routing
Patching video signals via the VideoHub router, and patchbays.
Employee Handbook
How to let us all survive here
Storage Areas
Closets, cages, and venues.
Events/United Policies and Procedures
Things to know when interacting with campus partners or clients
Comm Systems
completed How we communicate across benson during events.
People
*complete Supervisors and Other important contacts.
Automation Systems
banners, linesets, ect
CrashPresenter (ProPresenter)
How to use this wonderfully crafted, totally bug-free, and absolutely intuitive piece of software perfection!
Cables
what is what and what it does and where it goes
Gym Events
How to run an event in the gym.
Underground
How to run events and systems in the UG
Stage (and extension)
Things on and about the stage and stage extension
The Backstage and Related Areas
Storage layout for backstage, stairwells and loading dock
FOH Quickstart Guide
How to get the console up and running with minimal pain
Broadcast Audio Quickstart Guide
2Track Recording
Only for recording the mix of the FOH Console
Multitrack Audio Recording
The normal recording mode for most events that get recorded
Lighting Quickstart
How to get light on the stage quickly
Waves
Mixing Basics
Stuff to cover but where
Presets
Quickly switching between different pre-defined configurations.
Device Patching
How to manually route audio from one device to another
Troubleshooting
How to attempt to fix things when they get flamey
Quickstart Operation Guide
How to get comfortable with the cameras when chapel is starting in 10min.
Configuring the cameras
Changing settings to format SD cards, correct white balance, and fix stray configurations.
Operations on the Panel
How to use the 1 M/E video panel in the control room
Operations in the App
How to use the ATEM App to control the switcher
Routing via the App
Routing sources through the CompactVideoHub by using the app
Routing via the Patchbays
Patching by physically connecting cables to the video patch panels
Rules
How to start Dante Controller Up
Basic Commands
Powering on the desk and related components
How to turn the desk on: Walk into the booth, turn right, and look straight ahead. On the tall black rack straight ahead (with cords crisscrossing the top), there will be a big green button next to a big red button with a key sticking out between them. Press ...
Powering on the desk
Right now, it's always on. So... :)
Loading a Show File
You should see a menu bar at the top of the middle screen. (If you don't, press the "Master Screen" button to the bottom right of the center screen. Tap files, then load template. You should be presented with a few options for show types (Band, Music Dept - C...
How to Set up a Recording
Load Reaper on the Broadcast Audio Mac Load a project template that matches the event type. Save the project as defined in -Saving a recording- Profit!
How to End a Recording
Hit the stop button in Reaper's transport bar
How to Save a Recording
Reaper recordings will be saved under the EventRecordingFolder directory. It should be the top folder in the favorites section in Finder. There will be a couple of subdirectories: Bethel_Events: For any Bethel hosted or intended events that don't explicitl...
Adding a Channel to the Channel Bank
Bring up the menu bar again, then tap "Layout", then "Channel List". Locate the layer and bank on the faders where you want to place a channel. Press the "LCD Function" button to the top left of the fader surface you are assigning, then when the screens above...
Top to Bottom of the Channel Strip
How to Patch a New Input
Simple Navigation
Location and Purpose of Physical Buttons and Knobs
Gain
Turn it up until it's loud enough, but not louder. If loading from a template, the gains are generally set at a sane level. Some inputs with sources that change week to week (different vocalists, different guitar rigs, etc...) will more often need gain adjust...
Compression
Compression will take the louder parts of a signal and make them quieter in a controlled way. You have 5 controls at your disposal in most compressors as follows: Threshold: The most important control. Will set the volume threshold that the compressor will s...
Gates
Spice Rack
Mustard
Control Groups
Aux's
Stereo vs Mono inputs
Changing input types is done through the channel input menu, by tapping on a channels preamp icon. There will be boxes for stereo and mono at the top of the popup. Select the type desired. What is a mono? Monophonic audio is audio that comes from a single ...